冷再生機租賃簡介

Introduction to Cold Recycling Machine Rental

　　道路冷再生機租賃是在常溫下使用冷再生機械（以路星LZS2400型就地冷再生機為例）連續完成銑刨和破碎舊路面結構層(包括面層和部分基層)、添加再生材料、拌和、攤鋪等作業過程，碾壓成型后的攤鋪層可作為低等級公路的基層或面層及高等級公路的底基層或基層，屬于道路養護維修范疇。它主要解決瀝青路面上基層破損的問題。具體講，道路冷再生是指充分利用現有瀝青道路舊鋪層材料（面層與基層）必要時加入部分新骨料，并按比例加入一 定量的添加劑（水泥、石灰、粉煤灰等）在自然環境溫度下就地連續地完成材料的銑刨、破碎、拌和、攤鋪及壓實成型，從而修筑出具有所需性能質量的新基層的作業過程。

Road cold recycling machine rental refers to the use of cold recycling machinery (taking the Luxing LZS2400 on-site cold recycling machine as an example) at room temperature to continuously complete the milling and crushing of old pavement structural layers (including surface layers and some base layers), adding recycled materials, mixing, paving and other operations. The rolled paving layer can be used as the base or surface layer of low-grade highways and the subgrade or base layer of high-grade highways, which belongs to the scope of road maintenance and repair. It mainly solves the problem of base damage on asphalt pavement. Specifically, road cold recycling refers to the process of fully utilizing existing asphalt pavement materials (surface layer and base layer), adding some new aggregates when necessary, and adding a certain amount of additives (cement, lime, fly ash, etc.) in proportion to continuously mill, crush, mix, spread, and compact the materials on site at natural ambient temperatures, in order to construct a new base layer with the required performance quality.

　　冷再生機租賃不僅適用于高等級公路的維修與改造，也適用于一般道路及鄉間公路的維修與改造。此技術在歐美等國家已得到了較為普遍的應用，并常常作為路面維修的首 選方案，隨我國98年引進第 一臺就地冷再生機后，近幾年來，就地冷再生技術在我國受到了業內人士普遍的關注與認同，推廣普及速度很快，例如遼寧、吉林及河北等地區已經應用相當普遍，并且取得了良好的效果。

Cold recycling machine leasing is not only suitable for the maintenance and renovation of high-grade highways, but also for the maintenance and renovation of general roads and rural roads. This technology has been widely applied in countries such as Europe and America, and is often used as the preferred solution for road maintenance. With the introduction of the first on-site cold recycling machine in China in 1998, in recent years, on-site cold recycling technology has received widespread attention and recognition from industry insiders in China, and its promotion and popularization speed is very fast. For example, it has been widely applied in regions such as Liaoning, Jilin, and Hebei, and has achieved good results.

　　冷再生機租賃的主要施工機具為集破碎與拌和為一體的冷再生機。冷再生機的核心是裝有大量專用刀頭的銑刨和拌和轉子。轉子向上旋轉銑刨原路面材料，冷再生機向前行進時，轉子轉動，同時水通過軟管從再生機連接的水車中運送過來，并在再生機的拌和倉中噴灑。水的輸送量通過微處理器控制的泵送系統精確控制。銑刨轉子將水與銑刨料充分拌和，并達到需要的含水量，從而達到混合料的大壓實度。

The main construction equipment for leasing cold recycling machines is a cold recycling machine that integrates crushing and mixing. The core of a cold recycling machine is a milling and mixing rotor equipped with a large number of specialized cutting heads. The rotor rotates upwards to mill the raw road surface material, and when the cold recycling machine moves forward, the rotor rotates. At the same time, water is transported from the water truck connected to the recycling machine through a hose and sprayed in the mixing bin of the recycling machine. The water delivery volume is precisely controlled by a microprocessor controlled pumping system. The milling rotor thoroughly mixes water with the milling material to achieve the required moisture content, thereby achieving high compaction of the mixture.

　　粉狀穩定劑，如水泥,白灰，需按設計添加量事先撒布在再生機前的路面上，再生機將粉狀穩定劑與再生料和水一次性拌和。

Powdered stabilizers, such as cement and white ash, need to be spread on the road surface in front of the recycling machine according to the designed addition amount. The recycling machine will mix the powdered stabilizer with recycled materials and water at once.

本文由冷再生機租賃友情奉獻.更多有關的知識請點擊:http://m.luhubox.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is a friendly contribution from Cold Recycling Machine Rental For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message